What are the differences between dry and wet clutches?

The difference lies in the cooling method of the clutch friction plates. The two sets of clutch plates of the wet clutch are in a sealed oil tank and absorb heat through the transmission oil soaked in the clutch plates. The friction plate of the dry clutch does not have a sealed oil groove and needs to be cooled by air. The following editor will introduce the difference between dry and wet clutches? Let's introduce the difference!

What are the differences between dry and wet clutches? Difference introduction-dry clutch

Using air to cool the clutch is called a dry clutch. In use, the clutch is required to be able to easily engage and disengage with the power, work in a short half-clutch state, and the clutch should not be overheated. Because dry clutches do not have the resistance of engine oil, they generally respond faster to bite and have a bit stronger bite force. Also because there is no cooling of the oil, dry clutches generally use exposed methods to dissipate heat.

Difference introduction--wet clutch

Cooled by oil, it is called wet clutch. Its cooling oil does not protect the friction plate, but makes the power transmission smooth and soft. Its advantage is that it has a long service life and generally does not malfunction. Unless the operating regulations are violated, the clutch is often placed in Work in semi-clutch state. It is mostly used in automatic transmissions, such as the manual and automatic integrated transmissions commonly used nowadays. The clutch is combined by compressing multiple steel plates and friction plates through the action of hydraulic cylinders, and the steel plates and friction plates are separated under the action of spring force after the oil is returned.

The dry and wet transmission principles are basically the same. Both clutches work in turn, but the connecting medium of the driving disc and the driven disc of the clutch is different. The dry double clutch relies on air, and the wet double clutch relies on oil. . What are the differences between dry and wet clutches introduced by the editor above? The difference is introduced, I hope it can help everyone!